OAI logo

The Open Archives Initiative Protocol for Metadata Harvesting

 

Protocol Version 2.0 of 2002-06-14
Document Version 2004/09/15T20:21:00Z
http://www.openarchives.org/OAI/2.0/openarchivesprotocol.htm

Previous protocol version: Protocol Version 1.1 of 2001-07-02
Instructions for migrating from Version 1.1 to 2.0
Implementation Guidelines

Editors

The OAI Executive:
Carl Lagoze <lagoze@cs.cornell.edu > -- Cornell University - Computer Science
Herbert Van de Sompel <herbertv@lanl.gov > -- Los Alamos National Laboratory - Research Library

From the OAI Technical Committee:
Michael Nelson <m.l.nelson@larc.nasa.gov > -- NASA - Langley Research Center
Simeon Warner <simeon@cs.cornell.edu > -- Cornell University - Computer Science

Table of Contents

1. Introduction
2. Definitions and Concepts
   2.1. Harvester
   2.2. Repository
   2.3. Item
   2.4. Unique Identifier
   2.5. Record
      2.5.1 Deleted records
   2.6. Set
   2.7. Selective Harvesting
      2.7.1 Selective Harvesting and Datestamps
      2.7.2 Selective Harvesting and Sets
3. Protocol Features
   3.1. HTTP Embedding of OAI-PMH requests
      3.1.1. HTTP Request Format
      3.1.2. HTTP Response Format
      3.1.3. Response Compression
   3.2. XML Response Format
      3.2.1. XML Schema for Validating Responses to OAI-PMH Requests
   3.3. UTCdatetime
      3.3.1. UTCdatetime in Protocol Requests
      3.3.2. UTCdatetime in Protocol Responses
   3.4. metadataPrefix and Metadata Schema
   3.5. Flow Control
      3.5.1 Idempotency of resumptionTokens
   3.6. Error and Exception Conditions
4. Protocol Requests and Responses
   4.1. GetRecord
   4.2. Identify
   4.3. ListIdentifiers
   4.4. ListMetadataFormats
   4.5. ListRecords
   4.6. ListSets
5. Dublin Core
6. Implementation Guidelines
Acknowledgements
Document History

1. Introduction

The Open Archives Initiative Protocol for Metadata Harvesting (referred to as the OAI-PMH in the remainder of this document) provides an application-independent interoperability framework based on metadata harvesting. There are two classes of participants in the OAI-PMH framework:

In this document the key words "must", "must not", " required", "shall", "shall not", "should", " should not", "recommended", "may", and "optional " in bold face are to be interpreted as described in RFC 2119 . An implementation is not conformant if it fails to satisfy one or more of the "must" or "required" level requirements for the protocols it implements.

This document refers in several places to "community-specific" practices to which individual protocol implementations may conform. These practices are described in an accompanying Implementation Guidelines document.

2. Definitions and Concepts

2.1 Harvester

A harvester is a client application that issues OAI-PMH requests. A harvester is operated by a service provider as a means of collecting metadata from repositories.

2.2 Repository

A repository is a network accessible server that can process the 6 OAI-PMH requests in the manner described in this document. A repository is managed by a data provider to expose metadata to harvesters. To allow various repository configurations, the OAI-PMH distinguishes between three distinct entities related to the metadata made accessible by the OAI-PMH.

2.3 Item

An item is a constituent of a repository from which metadata about a resource can be disseminated. An item is conceptually a container that stores or dynamically generates metadata about a single resource in multiple formats, each of which can be harvested as records via the OAI-PMH. Each item has an identifier that is unique within the scope of the repository of which it is a constituent.

2.4 Unique Identifier

A unique identifier unambigiously identifies an item within a repository; the unique identifier is used in OAI-PMH requests for extracting metadata from the item. Items may contain metadata in multiple formats. The unique identifier maps to the item, and all possible records available from a single item share the same unique identifier.

The format of the unique identifier must correspond to that of the URI (Uniform Resource Identifier) syntax. Individual communities may develop community-specific URI schemes for coordinated use across repositories. The scheme component of the unique identifiers must not correspond to that of a recognized URI scheme unless the identifiers conform to that scheme. Repositories may implement the oai-identifier syntax described in the accompanying Implementation Guidelines document.

Unique identifiers play two roles in the protocol:

  1. Response: Identifiers are returned by both the ListIdentifiers and ListRecords requests.
  2. Request: An identifier, in combination with a metadataPrefix, is used in the GetRecord request as a means of requesting a record in a specific metadata format from an item.

Note that the identifier described here is not that of a resource. The nature of a resource identifier is outside the scope of the OAI-PMH. To facilitate access to the resource associated with harvested metadata, repositories should use an element in metadata records to establish a linkage between the record (and the identifier of its item) and the identifier (URL, URN, DOI, etc.) of the associated resource. The mandatory Dublin Core format provides the identifier element that should be used for this purpose.

2.5 Record

A record is metadata expressed in a single format. A record is returned in an XML-encoded byte stream in response to an OAI-PMH request for metadata from an item. A record is identified unambigiously by the combination of the unique identifier of the item from which the record is available, the metadataPrefix identifying the metadata format of the record, and the datestamp of the record. The XML-encoding of records is organized into the following parts:

The following example shows an XML-encoding of a record and its components:

<header>
  <identifier>oai:arXiv:cs/0112017</identifier>
  <datestamp>2002-02-28</datestamp>
  <setSpec>cs</setSpec>
  <setSpec>math</setSpec>
</header>
<metadata>
 <oai_dc:dc 
     xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" 
     xmlns:dc="http://purl.org/dc/elements/1.1/" 
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
     xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ 
     http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
   <dc:title>Using Structural Metadata to Localize Experience of Digital 
             Content</dc:title>
   <dc:creator>Dushay, Naomi</dc:creator>
   <dc:subject>Digital Libraries</dc:subject>
   <dc:description>With the increasing technical sophistication of both 
    information consumers and providers, there is increasing demand for 
    more meaningful experiences of digital information. We present a 
    framework that separates digital object experience, or rendering, 
    from digital object storage and manipulation, so the
    rendering can be tailored to particular communities of users. 
   </dc:description>
   <dc:description>Comment: 23 pages including 2 appendices, 
                   8 figures</dc:description>
   <dc:date>2001-12-14</dc:date>
   <dc:type>e-print</dc:type>
   <dc:identifier>http://arXiv.org/abs/cs/0112017</dc:identifier>
 </oai_dc:dc>
</metadata>
<about> 
  <provenance
      xmlns="http://www.openarchives.org/OAI/2.0/provenance" 
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
      xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/provenance
      http://www.openarchives.org/OAI/2.0/provenance.xsd">
    <originDescription harvestDate="2002-02-02T14:10:02Z" altered="true">
      <baseURL>http://the.oa.org</baseURL>
      <identifier>oai:r2:klik001</identifier>
      <datestamp>2002-01-01</datestamp>
      <metadataNamespace>http://www.openarchives.org/OAI/2.0/oai_dc/</metadataNamespace>
    </originDescription>
  </provenance>
</about>
      

2.5.1 Deleted records

If a record is no longer available then it is said to be deleted. Repositories must declare one of three levels of support for deleted records in the deletedRecord element of the Identify response:

If a repository does not keep track of deletions then such records will simply vanish from responses and there will be no way for a harvester to discover deletions through continued incremental harvesting. If a repository does keep track of deletions then the datestamp of the deleted record must be the date and time that it was deleted. Responses to GetRecord request for a deleted record must then include a header with the attribute status="deleted", and must not include metadata or about parts. Similarly, responses to selective harvesting requests with set membership and date range criteria that include deleted records must include the headers of these records. Incremental harvesting will thus discover deletions from repositories that keep track of them.

Deleted status is a property of individual records. Like a normal record, a deleted record is identified by a unique identifier, a metadataPrefix and a datestamp. Other records, with different metadataPrefix but the same unique identifier, may remain available for the item.

2.6 Set

A set is an optional construct for grouping items for the purpose of selective harvesting. Repositories may organize items into sets. Set organization may be flat, i.e. a simple list, or hierarchical. Multiple hierarchies with distinct, independent top-level nodes are allowed. Hierarchical organization of sets is expressed in the syntax of the setSpec parameter as described below. When a repository defines a set organization it must include set membership information in the headers of items returned in response to the ListIdentifiers , ListRecords and GetRecord requests.

Each node in a set organization of a repository has:

The following is an example of a possible set hierarchy in a repository:

The following table shows a possible representation of the above set hierarchy by means of setName and respective setSpec values.

setName setSpec
Institutions institution

Oceanside University of Nebraska

institution:nebraska

Valley View University of Florida

institution:florida
Subjects subject

Existential Kenesiology

subject:kenesiology

Quantum Psychology

subject:quantum

An item may be organized in one set, several sets, or no sets at all. In the example above, it is conceivable that an individual item is organized in both subject and institution:florida. A harvester should not assume that harvesting every set in a repository will retrieve metadata from all items in the repository. Items may also be assigned to interior nodes in the set hierarchy.

The actual meaning of a set or of the arrangement of sets in a repository is not defined in the protocol. It is expected that individual communities may formulate well-defined set configurations with perhaps a controlled vocabulary for setNames and setSpec , and may even develop mechanisms for exposing these to harvesters. For example, a group of cooperating e-print archives in a specific discipline may agree on sets that arrange metadata in their repositories based on a controlled subject classification.

A repository's set hierarchy is represented in the protocol via setSpecs. ListSets returns a list indicating the configuration of sets in a repository. Each member of this list must include a setSpec and a setName and may include a setDescription. ListRecords and ListIdentifiers requests may include an optional set argument, the value of which is a setSpec, to specify the target set for selective harvesting. In the previous example of a set hierarchy, the setSpec institution:nebraska could be used in a request to return only those records that are disseminated from items organized in the set represented by this setSpec. Five issues should be noted here:

2.7 Selective Harvesting

Selective harvesting allows harvesters to limit harvest requests to portions of the metadata available from a repository. The OAI-PMH supports selective harvesting with two types of harvesting criteria that may be combined in an OAI-PMH request: datestamps and set membership.

2.7.1 Selective Harvesting and Datestamps

Harvesters may use datestamps to harvest only those records that were created, deleted, or modified within a specified date range. To specify datestamp-based selective harvesting, datestamps are included as values of the optional arguments, from and until, in the ListRecords and ListIdentifiers requests. Harvesting is restricted to the range specified by the from and until arguments, extending back to the earliest datestamp if from is omitted, and forward to the most recent datestamp if until is omitted. Range limits are inclusive: from specifies a bound that must be interpreted as "greater than or equal to", until specifies a bound that must be interpreted as "less than or equal to". Therefore, the from arugment must be less than or equal to the until argument. Otherwise, a repository must issue a badArgument error.

Repositories must support selective harvesting with the from and until arguments expressed at day granularity. Optional support for seconds granularity is indicated in the response to the Identify request. The value of datestamps in both requests and responses must comply to the specifications for UTCdatetime in this document. A repository must update the datestamp of a record if a change occurs, the result of which would be a change to the metadata part of the XML-encoding of the record. Such changes include, but are not limited to, changes to the metadata of the record, changes to the metadata format of the record, introduction of a new metadata format, termination of support for a metadata format, etc.

Datestamp ranges for selective harvesting are expressed in the from and until arguments that may be submitted in the ListRecords and ListIdentifiers requests. Repositories must use the following rules to create a ListRecords response matching the specified datestamp range according to the type of change that occured within the repository. The response to a ListIdentifiers request follows the same rules but is abbreviated to include only headers rather than records.

Every header returned by the GetRecord, ListRecords or ListIdentifiers requests contains a datestamp, which reflects the most recent date and time of the creation, modification, or deletion according to the rules defined above.

2.7.2 Selective Harvesting and Sets

Harvesters may specify set membership as a criteria for selective harvesting. To specify set-based selective harvesting, a setSpec is included as the value of the optional set argument to the ListRecords and ListIdentifiers requests, thereby specifying selective harvesting of records from items within the respective set.

When a setSpec is used as an argument, the response must include:

3. Protocol Features

3.1 HTTP Embedding of OAI-PMH requests

OAI-PMH requests are expressed as HTTP requests. A typical implementation uses a standard Web server that is configured to dispatch OAI-PMH requests to the software handling these requests. The remainder of this section describes the aspects of the protocol that are specific to the HTTP embedding.

3.1.1 HTTP Request Format

OAI-PMH requests must be submitted using either the HTTP GET or POST methods. POST has the advantage of imposing no limitations on the length of arguments. Repositories must support both the GET and POST methods. There is a single base URL for all requests. The base URL specifies the Internet host and port, and optionally a path, of an HTTP server acting as a repository. Repositories expose their base URL as the value of the baseURL element in the Identify response. Note that the composition of any path is determined by the configuration of the repository's HTTP server.

In addition to the base URL, all requests consist of a list of keyword arguments, which take the form of key=value pairs. Arguments may appear in any order and multiple arguments must be separated by ampersands [&]. Each OAI-PMH request must have at least one key=value pair that specifies the OAI-PMH request issued by the harvester:

The number and nature of additional key=value pairs depends on the arguments for the individual request.

3.1.1.1 Encoding an OAI-PMH request in a URL for an HTTP GET

URLs for GET requests have keyword arguments appended to the base URL, separated from it by a question mark [?]. For example, the URL of a GetRecord request to a repository with base URL that is http://an.oa.org/OAI-script might be:

http://an.oa.org/OAI-script?
verb=GetRecord&identifier=oai:arXiv.org:hep-th/9901001&metadataPrefix=oai_dc

However, since special characters in URIs must be encoded, the correct form of the above GET request URL is:

http://an.oa.org/OAI-script?
verb=GetRecord&identifier=oai%3AarXiv.org%3Ahep-th%2F9901001&metadataPrefix=oai_dc

3.1.1.2 Encoding an OAI-PMH request in an HTTP POST

Keyword arguments are carried in the message body of the HTTP POST. The Content-Type of the request must be application/x-www-form-urlencoded. For example, submitting the same request as above using the POST method would use just the base URL as the URL, with the format of the POST being:

POST http://an.oa.org/OAI-script HTTP/1.0
Content-Length: 82
Content-Type: application/x-www-form-urlencoded

verb=GetRecord&identifier=oai%3AarXiv.org%3Ahep-th%2F9901001&metadataPrefix=oai_dc

3.1.1.3 Encoding of special characters in keyword arguments of OAI-PMH requests

The syntax rules for URIs restrict a few characters to special roles in certain contexts, and require that if these characters are used in any other way that they must be written as an escape sequence, i.e. a percent sign followed by the character code in hexadecimal. The reserved characters include:

Character
URI Role
Escape Sequence
/
Path Component Separator
%2F
?
Query Component Separator
%3F
#
Fragment Identifier
%23
=
Name/Value Separator
%3D
&
Argument Separator in Query Component
%26
:
Host Port Separator
%3A
;
Authority Namespace Separator
%3B
 
Space Character
%20
%
Escape Indicator
%25
+
Escaped Space
%2B

As a result, these characters must be represented by their respective escape sequence if their use does not correspond to their established URI role. In case of the OAI-PMH, this means that the reserved characters must be encoded when they appear in the value part of the key=value pairs of the request. This applies for both the GET and POST encoding of the OAI-PMH requests.

3.1.2 HTTP Response Format

Responses to requests are formatted as HTTP responses, with appropriate HTTP header fields.

3.1.2.1 Content-Type

The Content-Type returned for all OAI-PMH requests must be text/xml.

3.1.2.2 Status-Code

OAI-PMH errors are distinguished from HTTP Status-Codes. Since OAI-PMH uses HTTP as a transport layer, servers implementing OAI-PMH must conform to HTTP status code definitions and report relevant HTTP transport layer status via those Status-Codes. OAI-PMH repositories may employ HTTP Status-Codes in addition to "200 OK". For instance, the following Status-Codes may be useful for load balancing in OAI repositories:

3.1.3 Response Compression

Response compression is optional in OAI-PMH. Compression of responses to OAI-PMH requests is handled at the level of HTTP, with the following restrictions:

3.2 XML Response Format

All responses to OAI-PMH requests must be well-formed XML instance documents. Encoding of the XML must use the UTF-8 representation of Unicode. Character references, rather than entity references, must be used. Character references allow XML responses to be treated as stand-alone documents that can be manipulated without dependency on entity declarations external to the document.

The XML data for all responses to OAI-PMH requests must validate against the XML Schema shown at the end of this section . As can be seen from that schema, responses to OAI-PMH requests have the following common markup:

  1. The first tag output is an XML declaration where the version is always 1.0 and the encoding is always UTF-8, eg: <?xml version="1.0" encoding="UTF-8" ?>
  2. The remaining content is enclosed in a root element with the name OAI-PMH. This element must have three attributes that define the XML namespaces used in the remainder of the response and the location of the validating schema:
  3. For all responses, the first two children of the root element are:
  4. The third child of the root element is either:

An example of a successful reply to the GetRecord request shown above is of the form:

<?xml version="1.0" encoding="UTF-8" ?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
 <responseDate>2002-05-01T19:20:30Z</responseDate>
 <request verb="GetRecord" identifier="oai:arXiv.org:hep-th/9901001"
          metadataPrefix="oai_dc">http://an.oa.org/OAI-script</request> 
 <GetRecord>
  <record>
      ...
  </record>
 </GetRecord> 
</OAI-PMH>      

3.2.1 XML Schema for Validating Responses to OAI-PMH Requests

<schema targetNamespace="http://www.openarchives.org/OAI/2.0/"
        xmlns="http://www.w3.org/2001/XMLSchema"
        xmlns:oai="http://www.openarchives.org/OAI/2.0/"
        elementFormDefault="qualified"
        attributeFormDefault="unqualified">

  <annotation>
    <documentation>
    XML Schema which can be used to validate replies to all OAI-PMH 
    v2.0 requests. Herbert Van de Sompel, 2002-05-13.
    Validated with XML Spy v.4.3 on 2002-05-13.
    Validated with XSV 1.203.2.45/1.106.2.22 on 2002-05-13.
    Added definition of protocolVersionType instead of using anonymous 
    type. No change of function. Simeon Warner, 2004-03-29.
    Tightened definition of UTCdatetimeType to enforce the restriction 
    to UTC Z notation. Simeon Warner, 2004-09-14.
    </documentation>
  </annotation>

  <element name="OAI-PMH" type="oai:OAI-PMHtype"/>

  <complexType name="OAI-PMHtype">
    <sequence>
      <element name="responseDate" type="dateTime"/>
      <element name="request" type="oai:requestType"/>
      <choice>
        <element name="error" type="oai:OAI-PMHerrorType" maxOccurs="unbounded"/>
        <element name="Identify" type="oai:IdentifyType"/>
        <element name="ListMetadataFormats" type="oai:ListMetadataFormatsType"/>
        <element name="ListSets" type="oai:ListSetsType"/>
        <element name="GetRecord" type="oai:GetRecordType"/>
        <element name="ListIdentifiers" type="oai:ListIdentifiersType"/>
        <element name="ListRecords" type="oai:ListRecordsType"/>
      </choice>
    </sequence>
  </complexType>

  <complexType name="requestType">
    <annotation>
      <documentation>Define requestType, indicating the protocol request that 
      led to the response. Element content is BASE-URL, attributes are arguments 
      of protocol request, attribute-values are values of arguments of protocol 
      request</documentation>
    </annotation>
    <simpleContent>
      <extension base="anyURI">
        <attribute name="verb" type="oai:verbType" use="optional"/>
        <attribute name="identifier" type="oai:identifierType" use="optional"/>
        <attribute name="metadataPrefix" type="oai:metadataPrefixType" use="optional"/>
        <attribute name="from" type="oai:UTCdatetimeType" use="optional"/>
        <attribute name="until" type="oai:UTCdatetimeType" use="optional"/>
        <attribute name="set" type="oai:setSpecType" use="optional"/>
        <attribute name="resumptionToken" type="string" use="optional"/>
      </extension>
    </simpleContent>
  </complexType>

  <simpleType name="verbType">
    <restriction base="string">
      <enumeration value="Identify"/>
      <enumeration value="ListMetadataFormats"/>
      <enumeration value="ListSets"/>
      <enumeration value="GetRecord"/>
      <enumeration value="ListIdentifiers"/>
      <enumeration value="ListRecords"/>
    </restriction>
  </simpleType>

  <!-- define OAI-PMH error conditions -->
  <!-- =============================== -->

  <complexType name="OAI-PMHerrorType">
    <simpleContent>
      <extension base="string">
        <attribute name="code" type="oai:OAI-PMHerrorcodeType" use="required"/>
      </extension>
    </simpleContent>
  </complexType>

  <simpleType name="OAI-PMHerrorcodeType">
    <restriction base="string">
      <enumeration value="cannotDisseminateFormat"/>
      <enumeration value="idDoesNotExist"/>
      <enumeration value="badArgument"/>
      <enumeration value="badVerb"/>
      <enumeration value="noMetadataFormats"/>
      <enumeration value="noRecordsMatch"/>
      <enumeration value="badResumptionToken"/>
      <enumeration value="noSetHierarchy"/>
    </restriction>
  </simpleType>

  <!-- define OAI-PMH verb containers -->
  <!-- ============================== -->

  <complexType name="IdentifyType">
    <sequence>
      <element name="repositoryName" type="string"/>
      <element name="baseURL" type="anyURI"/>
      <element name="protocolVersion" type="oai:protocolVersionType"/>
      <element name="adminEmail" type="oai:emailType" maxOccurs="unbounded"/>
      <element name="earliestDatestamp" type="oai:UTCdatetimeType"/>
      <element name="deletedRecord" type="oai:deletedRecordType"/>
      <element name="granularity" type="oai:granularityType"/>
      <element name="compression" type="string" minOccurs="0" maxOccurs="unbounded"/>
      <element name="description" type="oai:descriptionType" 
               minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
  </complexType>

  <complexType name="ListMetadataFormatsType">
    <sequence>
      <element name="metadataFormat" type="oai:metadataFormatType" maxOccurs="unbounded"/>
    </sequence>
  </complexType>

  <complexType name="ListSetsType">
    <sequence>
      <element name="set" type="oai:setType" maxOccurs="unbounded"/>
      <element name="resumptionToken" type="oai:resumptionTokenType" minOccurs="0"/>
    </sequence>
  </complexType>

  <complexType name="GetRecordType">
    <sequence>
      <element name="record" type="oai:recordType"/>
    </sequence>
  </complexType>

  <complexType name="ListRecordsType">
    <sequence>
      <element name="record" type="oai:recordType" maxOccurs="unbounded"/>
      <element name="resumptionToken" type="oai:resumptionTokenType" minOccurs="0"/>
    </sequence>
  </complexType>

  <complexType name="ListIdentifiersType">
    <sequence>
      <element name="header" type="oai:headerType" maxOccurs="unbounded"/>
      <element name="resumptionToken" type="oai:resumptionTokenType" minOccurs="0"/>
    </sequence>
  </complexType>

  <!-- define basic types used in replies to 
       GetRecord, ListRecords, ListIdentifiers -->
  <!-- ======================================= -->

  <complexType name="recordType">
    <annotation>
      <documentation>A record has a header, a metadata part, and
        an optional about container</documentation>
    </annotation>
    <sequence>
      <element name="header" type="oai:headerType"/>
      <element name="metadata" type="oai:metadataType" minOccurs="0"/>
      <element name="about" type="oai:aboutType" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
  </complexType>

  <complexType name="headerType">
    <annotation>
      <documentation>A header has a unique identifier, a datestamp,
        and setSpec(s) in case the item from which
        the record is disseminated belongs to set(s).
        the header can carry a deleted status indicating
        that the record is deleted.</documentation>
    </annotation>
    <sequence>
      <element name="identifier" type="oai:identifierType"/>
      <element name="datestamp" type="oai:UTCdatetimeType"/>
      <element name="setSpec" type="oai:setSpecType" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute name="status" type="oai:statusType" use="optional"/>
  </complexType>

  <simpleType name="identifierType">
    <restriction base="anyURI"/>
  </simpleType>

  <simpleType name="statusType">
    <restriction base="string">
      <enumeration value="deleted"/>
    </restriction>
  </simpleType>

  <complexType name="metadataType">
    <annotation>
      <documentation>Metadata must be expressed in XML that complies
       with another XML Schema (namespace=#other). Metadata must be 
       explicitly qualified in the response.</documentation>
    </annotation>
    <sequence>
      <any namespace="##other" processContents="strict"/>
    </sequence>
  </complexType>

  <complexType name="aboutType">
    <annotation>
      <documentation>Data "about" the record must be expressed in XML
      that is compliant with an XML Schema defined by a community.</documentation>
    </annotation>
    <sequence>
      <any namespace="##other" processContents="strict"/>
    </sequence>
  </complexType>

  <complexType name="resumptionTokenType">
    <annotation>
      <documentation>A resumptionToken may have 3 optional attributes
       and can be used in ListSets, ListIdentifiers, ListRecords
       responses.</documentation>
    </annotation>
    <simpleContent>
      <extension base="string">
        <attribute name="expirationDate" type="dateTime" use="optional"/>
        <attribute name="completeListSize" type="positiveInteger" use="optional"/>
        <attribute name="cursor" type="nonNegativeInteger" use="optional"/>
      </extension>
    </simpleContent>
  </complexType>

  <complexType name="descriptionType">
    <annotation>
      <documentation>The descriptionType is used for the description
      element in Identify and for setDescription element in ListSets.
      Content must be compliant with an XML Schema defined by a 
      community.</documentation>
    </annotation>
    <sequence>
      <any namespace="##other" processContents="strict"/>
    </sequence>
  </complexType>

  <simpleType name="UTCdatetimeType">
    <annotation>
      <documentation>Datestamps are to either day (type date)
      or to seconds granularity (type oai:UTCdateTimeZType)</documentation>
    </annotation>
    <union memberTypes="date oai:UTCdateTimeZType"/>
  </simpleType>

  <simpleType name="UTCdateTimeZType">
    <restriction base="dateTime">
      <pattern value=".*Z"/>
    </restriction>
  </simpleType>

  <!-- define types used for Identify verb only -->
  <!-- ======================================== -->

  <simpleType name="protocolVersionType">
    <restriction base="string">
      <enumeration value="2.0"/>
    </restriction>
  </simpleType>

  <simpleType name="emailType">
    <restriction base="string">
      <pattern value="\S+@(\S+\.)+\S+"/>
    </restriction>
  </simpleType>

  <simpleType name="deletedRecordType">
    <restriction base="string">
      <enumeration value="no"/>
      <enumeration value="persistent"/>
      <enumeration value="transient"/>
    </restriction>
  </simpleType>

  <simpleType name="granularityType">
    <restriction base="string">
      <enumeration value="YYYY-MM-DD"/>
      <enumeration value="YYYY-MM-DDThh:mm:ssZ"/>
    </restriction>
  </simpleType>

  <!-- define types used for ListMetadataFormats verb only -->
  <!-- =================================================== -->

  <complexType name="metadataFormatType">
    <sequence>
      <element name="metadataPrefix" type="oai:metadataPrefixType"/>
      <element name="schema" type="anyURI"/>
      <element name="metadataNamespace" type="anyURI"/>
    </sequence>
  </complexType>

  <simpleType name="metadataPrefixType">
    <restriction base="string">
      <pattern value="[A-Za-z0-9_!'$\(\)\+\-\.\*]+"/>
    </restriction>
  </simpleType>

  <!-- define types used for ListSets verb -->
  <!-- =================================== -->

  <complexType name="setType">
    <sequence>
      <element name="setSpec" type="oai:setSpecType"/>
      <element name="setName" type="string"/>
      <element name="setDescription" type="oai:descriptionType" 
               minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
  </complexType>

  <simpleType name="setSpecType">
    <restriction base="string">
      <pattern value="([A-Za-z0-9_!'$\(\)\+\-\.\*])+(:[A-Za-z0-9_!'$\(\)\+\-\.\*]+)*"/>
    </restriction>
  </simpleType>

</schema>
This Schema is available at http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd

3.3 UTCdatetime

Dates and times are uniformly encoded using ISO8601 and are expressed in UTC throughout the protocol. When time is included, the special UTC designator ("Z") must be used. UTC is implied for dates although no timezone designator is specified. For example, 1957-03-20T20:30:00Z is UTC 8:30:00 PM on March 20th 1957. UTCdatetime is used in both protocol requests and protocol replies, in the way described in the following sections.

3.3.1 UTCdatetime in Protocol Requests

Datestamps used as values of the optional arguments from and until in the ListIdentifiers and ListRecords requests are encoded using ISO8601 and are expressed in UTC. These arguments are used to specify datestamp-based selective harvesting. These arguments support the "Complete date" and the "Complete date plus hours, minutes and seconds" granularities defined in ISO8601. The legitimate formats are YYYY-MM-DD and YYYY-MM-DDThh:mm:ssZ. Both arguments must have the same granularity. All repositories must support YYYY-MM-DD. A repository that supports YYYY-MM-DDThh:mm:ssZ should indicate so in the Identify response. A request by a harvester with finer granularity than that supported by a repository must produce an error.

3.3.2 UTCdatetime in Protocol Responses

Datestamps appear in the headers of records that are returned in response to ListIdentifiers , GetRecord and ListRecords requests. These datestamps are encoded using ISO8601 and are expressed in UTC; they must be expressed in the finest granularity supported by the repository. The value of the datestamp must correspond to the rules for datestamp-based selective harvesting.

Each protocol response includes a responseDate element, which must be the time and date of the response in UTC. This is encoded using the "Complete date plus hours, minutes, and seconds" variant of ISO8601. This format is YYYY-MM-DDThh:mm:ssZ.

A resumptionToken in a protocol reply may include an optional argument expirationDate, which is expressed in UTC. This is encoded using the "Complete date plus hours, minutes, and seconds" variant of ISO8601. This format is YYYY-MM-DDThh:mm:ssZ.

3.4 metadataPrefix and Metadata Schema

OAI-PMH supports the dissemination of records in multiple metadata formats from a repository. The ListMetadataFormats request returns the list of all metadata formats available from a repository, each of which has the following properities:

The metadata in each record returned by ListRecords and GetRecord must comply with the conventions of the XML namespace specification. This means that the root element of the metadata part must contain an xmlns attribute, the value of which is the XML namespace URI of the metadata format. The root element must also contain an xsi:schemaLocation attribute that has a value that includes the URL of the XML schema for validation of the metadata. This URL must match the URL of the metadata schema for the metadataPrefix included as an argument to the ListRecords or GetRecord request (the mapping from metadataPrefix to metadata schema is defined by the repository's response to the ListMetadataFormats request).

For purposes of interoperability, repositories must disseminate Dublin Core, without any qualification. Therefore, the protocol reserves the metadataPrefix `oai_dc', and the URL of a metadata schema for unqualified Dublin Core, which is http://www.openarchives.org/OAI/2.0/oai_dc.xsd. The corresponding XML namespace URI is http://www.openarchives.org/OAI/2.0/oai_dc/.

The metadataPrefix `all' is reserved for future use. Implementations should not use this metadataPrefix.

Communities should adopt guidelines for sharing of metadataPrefixes, metadata schema and XML namespace URI's of metadata formats. Such guidelines are outside of the scope of the OAI-PMH. The accompanying Implementation Guidelines document provides some sample XML Schema and instance documents for common metadata formats such as MARC and RFC 1807.

3.5 Flow Control

A number of OAI-PMH requests return a list of discrete entities: ListRecords returns a list of records, ListIdentifiers returns a list of headers, and ListSets returns a list of sets. Collectively these requests are called list requests. In some cases, these lists may be large and it may be practical to partition them among a series of requests and responses. This partitioning is accomplished as follows:

Details of flow control and the resumptionToken are as follows:

The following optional attributes may be included as part of the resumptionToken element along with the resumptionToken itself:

The following example is a series of ListRecords requests where the complete list consists of 175 records and the repository only returns 100 records per response.

This flow control mechanism, in combination with HTTP transport layer facilities, provides some basic tools with which a repository can enforce an acceptable use policy for its harvesting interface. Communities implementing the OAI-PMH may need more extensive tools to enforce acceptable use policies for either the harvesting interface of their repositories or for the metadata harvested from those repositories. The enforcement of such additional policies is outside of the scope of the OAI-PMH.

3.5.1 Idempotency of resumptionTokens

Repositories that implement resumptionTokens must do so in a manner that allows harvesters to resume a sequence of requests for incomplete lists by re-issuing a list request with the most recent resumptionToken. The purpose of this is to allow harvesters to recover from network or other errors that would otherwise mean that the list request sequence would have to be started again. A re-issue of a list request with a resumptionToken occurs in two contexts:

  1. When there are no changes in the repository. There are no changes to the complete list returned by the list request sequence. In this case, the repository must return the same incomplete list when the most recent list request, i.e. the one with the most recent non-expired resumptionToken, is re-issued.
  2. When there are changes in the repository. There may be changes to the complete list returned by the list request sequence. These changes occur when the records disseminated in the list move in or out of the datestamp range of the request because of changes, modifications, or deletions in the repository. In this case, strict idempotency of the incomplete-list requests using resumptionToken values is not required. Instead, the incomplete list returned in response to a re-issued request must include all records with unchanged datestamps within the range of the initial list request. The incomplete list returned in response to a re-issued request may contain records with datestamps that either moved into or out of the range of the initial request. In cases where there are substantial changes to the repository, it may be appropriate for a repository to return a badResumptionToken error, signaling that the harvester should restart the list request sequence.

3.6 Error and Exception Conditions

In event of an error or exception condition, repositories must indicate OAI-PMH errors, distinguished from HTTP Status-Codes, by including one or more error elements in the response. While one error element is sufficient to indicate the presence of the error or exception condition, repositories should report all errors or exceptions that arise from processing the request. Each error element must have a code attribute that must be from the following table; each error element may also have a free text string value to provide information about the error that is useful to a human reader. These strings are not defined by the OAI-PMH.

Error Codes Description Applicable Verbs
badArgument The request includes illegal arguments, is missing required arguments, includes a repeated argument, or values for arguments have an illegal syntax. all verbs
badResumptionToken The value of the resumptionToken argument is invalid or expired. ListIdentifiers
ListRecords
ListSets
badVerb Value of the verb argument is not a legal OAI-PMH verb, the verb argument is missing, or the verb argument is repeated. N/A
cannotDisseminateFormat The metadata format identified by the value given for the metadataPrefix argument is not supported by the item or by the repository. GetRecord
ListIdentifiers

ListRecords
idDoesNotExist The value of the identifier argument is unknown or illegal in this repository. GetRecord
ListMetadataFormats
noRecordsMatch The combination of the values of the from, until, set and metadataPrefix arguments results in an empty list. ListIdentifiers
ListRecords
noMetadataFormats There are no metadata formats available for the specified item. ListMetadataFormats
noSetHierarchy The repository does not support sets. ListSets
ListIdentifiers
ListRecords

The following example demonstrates error handling in the case of an illegal verb argument. All request URLs shown from now on will be wrapped to make them more readable.

Request

http://arXiv.org/oai2?
       verb=nastyVerb

Response

<?xml version="1.0" encoding="UTF-8"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
  <responseDate>2002-05-01T09:18:29Z</responseDate>
  <request>http://arXiv.org/oai2</request>
  <error code="badVerb">Illegal OAI verb</error>
</OAI-PMH>

The following example demonstrates error handling in the case of a ListSets request to a repository that does not handle sets.

Request

http://arXiv.org/oai2?
       verb=ListSets
Response
<?xml version="1.0" encoding="UTF-8"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
  <responseDate>2002-05-01T09:18:29Z</responseDate>
  <request verb="ListSets">http://arXiv.org/oai2</request>
  <error code="noSetHierarchy">This repository does not 
    support sets</error>
</OAI-PMH>

4. Protocol Requests and Responses

This section lists the requests, or verbs, defined in the OAI-PMH. The documentation for each request is organized as follows:

An XML Schema defines the format of valid replies to all OAI-PMH requests.

4.1 GetRecord

Summary and Usage Notes

This verb is used to retrieve an individual metadata record from a repository. Required arguments specify the identifier of the item from which the record is requested and the format of the metadata that should be included in the record. Depending on the level at which a repository tracks deletions, a header with a "deleted" value for the status attribute may be returned, in case the metadata format specified by the metadataPrefix is no longer available from the repository or from the specified item.

Arguments

Error and Exception Conditions

Examples

Request

Request a record in the Dublin Core metadata format [URL shown without encoding to be more readable].

http://arXiv.org/oai2?
       verb=GetRecord&identifier=oai:arXiv.org:cs/0112017&metadataPrefix=oai_dc

Response

<?xml version="1.0" encoding="UTF-8"?> 
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
  <responseDate>2002-02-08T08:55:46Z</responseDate>
  <request verb="GetRecord" identifier="oai:arXiv.org:cs/0112017"
           metadataPrefix="oai_dc">http://arXiv.org/oai2</request>
  <GetRecord>
   <record> 
    <header>
      <identifier>oai:arXiv.org:cs/0112017</identifier> 
      <datestamp>2001-12-14</datestamp>
      <setSpec>cs</setSpec> 
      <setSpec>math</setSpec>
    </header>
    <metadata>
      <oai_dc:dc 
         xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" 
         xmlns:dc="http://purl.org/dc/elements/1.1/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ 
         http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
        <dc:title>Using Structural Metadata to Localize Experience of 
                  Digital Content</dc:title> 
        <dc:creator>Dushay, Naomi</dc:creator>
        <dc:subject>Digital Libraries</dc:subject> 
        <dc:description>With the increasing technical sophistication of 
            both information consumers and providers, there is 
            increasing demand for more meaningful experiences of digital 
            information. We present a framework that separates digital 
            object experience, or rendering, from digital object storage 
            and manipulation, so the rendering can be tailored to 
            particular communities of users.
        </dc:description> 
        <dc:description>Comment: 23 pages including 2 appendices, 
            8 figures</dc:description> 
        <dc:date>2001-12-14</dc:date>
      </oai_dc:dc>
    </metadata>
  </record>
 </GetRecord>
</OAI-PMH>

Request

Request a record in the Dublin Core metadata format. The requested record, however, can not be returned because the identifier does not exist. Therefore, the response does not contain a record container. It does have an error element with a code attribute that has the value idDoesNotExist. [URL shown without encoding for better readability].

http://arXiv.org/oai2?
       verb=GetRecord&identifier=oai:arXiv.org:quant-ph/02131001&metadataPrefix=oai_dc

Response

<?xml version="1.0" encoding="UTF-8"?> 
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
  <responseDate>2002-02-08T08:55:46Z</responseDate>
  <request verb="GetRecord" identifier="oai:arXiv.org:quant-ph/0213001"
           metadataPrefix="oai_dc">http://arXiv.org/oai2</request> 
  <error code="idDoesNotExist">No matching identifier in arXiv</error>
</OAI-PMH>

Request

Request a record in the oai_marc metadata format. However, the requested metadata format can not be disseminated for this identifier. Therefore, the response contains no record. It does contain an error element with a code attribute that has the value cannotDisseminateFormat. [URL shown without encoding for better readability].

http://arXiv.org/oai2?
       verb=GetRecord&identifier=oai:arXiv.org:quant-ph/9901001&metadataPrefix=oai_marc

Response

<?xml version="1.0" encoding="UTF-8"?> 
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
  <responseDate>2002-02-08T08:55:46Z</responseDate>
  <request verb="GetRecord" identifier="oai:arXiv.org:quant-ph/9901001"
           metadataPrefix="oai_marc">http://arXiv.org/oai1</request> 
  <error code="cannotDisseminateFormat"/>
</OAI-PMH>

4.2 Identify

Summary and Usage Notes

This verb is used to retrieve information about a repository. Some of the information returned is required as part of the OAI-PMH. Repositories may also employ the Identify verb to return additional descriptive information.

Arguments

None

Error and Exception Conditions

Response Format

The response must include one instance of the following elements:

The response must include one or more instances of the following element:

The response may include multiple instances of the following optional elements:

Examples

Request

http://memory.loc.gov/cgi-bin/oai?
       verb=Identify

Response

The below example of a response to the Identify request contains three description containers:

<?xml version="1.0" encoding="UTF-8"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
  <responseDate>2002-02-08T12:00:01Z</responseDate>
  <request verb="Identify">http://memory.loc.gov/cgi-bin/oai</request>
  <Identify>
    <repositoryName>Library of Congress Open Archive Initiative 
                    Repository 1</repositoryName>
    <baseURL>http://memory.loc.gov/cgi-bin/oai</baseURL>
    <protocolVersion>2.0</protocolVersion>
    <adminEmail>somebody@loc.gov</adminEmail>
    <adminEmail>anybody@loc.gov</adminEmail>
    <earliestDatestamp>1990-02-01T12:00:00Z</earliestDatestamp>
    <deletedRecord>transient</deletedRecord>
    <granularity>YYYY-MM-DDThh:mm:ssZ</granularity>
    <compression>deflate</compression>
    <description>
      <oai-identifier 
        xmlns="http://www.openarchives.org/OAI/2.0/oai-identifier"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
        xsi:schemaLocation=
            "http://www.openarchives.org/OAI/2.0/oai-identifier
        http://www.openarchives.org/OAI/2.0/oai-identifier.xsd">
        <scheme>oai</scheme>
        <repositoryIdentifier>lcoa1.loc.gov</repositoryIdentifier>
        <delimiter>:</delimiter>
        <sampleIdentifier>oai:lcoa1.loc.gov:loc.music/musdi.002</sampleIdentifier>
      </oai-identifier>
    </description>
    <description>
      <eprints 
         xmlns="http://www.openarchives.org/OAI/1.1/eprints"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/1.1/eprints 
         http://www.openarchives.org/OAI/1.1/eprints.xsd">
        <content>
          <URL>http://memory.loc.gov/ammem/oamh/lcoa1_content.html</URL>
          <text>Selected collections from American Memory at the Library 
                of Congress</text>
        </content>
        <metadataPolicy/>
        <dataPolicy/>
      </eprints>
    </description>
    <description>
      <friends 
          xmlns="http://www.openarchives.org/OAI/2.0/friends/" 
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
          xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/friends/
         http://www.openarchives.org/OAI/2.0/friends.xsd">
       <baseURL>http://oai.east.org/foo/</baseURL>
       <baseURL>http://oai.hq.org/bar/</baseURL>
       <baseURL>http://oai.south.org/repo.cgi</baseURL>
     </friends>
   </description>
 </Identify>
</OAI-PMH>

4.3 ListIdentifiers

Summary and Usage Notes

This verb is an abbreviated form of ListRecords, retrieving only headers rather than records. Optional arguments permit selective harvesting of headers based on set membership and/or datestamp. Depending on the repository's support for deletions, a returned header may have a status attribute of "deleted" if a record matching the arguments specified in the request has been deleted.

Arguments

Error and Exception Conditions

Examples

Request

List the headers of records in the oldarXiv metadata format that are added, modified or deleted since January 15, 1998 in the set physics:hep. [URL shown without encoding for better readability].

http://an.oa.org/OAI-script?
       verb=ListIdentifiers&from=1998-01-15&metadataPrefix=oldArXiv&set=physics:hep

Response

A list of four headers is returned. One header has a deleted status, indicating that a record in the metadata format specified by the metadataPrefix is no longer available. In addition, a resumptionToken (non-empty, value xxx45abttyz) has been returned, indicating that the list of headers is incomplete and that one or more subsequent requests will need to be issued to retrieve a complete list. In the example, the resumptionToken comes with all of the 3 optional attributes: expirationDate indicates that the resumptionToken will become unusable after 11:20 PM UTC on June 1st 2002; completeListSize indicates that the complete list consists of 6 identifiers; the zero-value for cursor indicates that no headers have been returned previous to this reply.

<?xml version="1.0" encoding="UTF-8"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
  <responseDate>2002-06-01T19:20:30Z</responseDate>
  <request verb="ListIdentifiers" from="1998-01-15" 
           metadataPrefix="oldarXiv"
           set="physics:hep">http://an.oa.org/OAI-script</request>
  <ListIdentifiers>
   <header>  
    <identifier>oai:arXiv.org:hep-th/9801001</identifier>
    <datestamp>1999-02-23</datestamp>
    <setSpec>physic:hep</setSpec>
   </header>
   <header>    
    <identifier>oai:arXiv.org:hep-th/9801002</identifier>
    <datestamp>1999-03-20</datestamp>
    <setSpec>physic:hep</setSpec>
    <setSpec>physic:exp</setSpec>
   </header>
   <header>  
    <identifier>oai:arXiv.org:hep-th/9801005</identifier>
    <datestamp>2000-01-18</datestamp>
    <setSpec>physic:hep</setSpec>
   </header> 
   <header status="deleted">  
    <identifier>oai:arXiv.org:hep-th/9801010</identifier>
    <datestamp>1999-02-23</datestamp>
    <setSpec>physic:hep</setSpec>
    <setSpec>math</setSpec>
   </header>  
   <resumptionToken expirationDate="2002-06-01T23:20:00Z" 
      completeListSize="6" 
      cursor="0">xxx45abttyz</resumptionToken>
 </ListIdentifiers>
</OAI-PMH>

Request

Issue a subsequent request to the one issued above. The single resumptionToken argument has the value returned in the previous response. [URL shown without encoding for better readability].

http://an.oa.org/OAI-script?
       verb=ListIdentifiers&resumptionToken=xxx45abttyz

Response

Two more headers are returned. The resumptionToken element at the end of the list has no value, indicating that the list is now complete. The value of the completeListSize attribute remains 6, while the value of the cursor attribute has changed to 4, indicating that a previous reply has (or previous replies have) already delivered 4 identifiers.

<?xml version="1.0" encoding="UTF-8"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
  <responseDate>2002-06-01T19:30:00Z</responseDate>
  <request verb="ListIdentifiers"
           resumptionToken="xxx45abttyz">http://an.oa.org/OAI-script</request>
  <ListIdentifiers>
    <header>  
      <identifier>oai:arXiv.org:hep-th/9801020</identifier>
      <datestamp>1999-02-23</datestamp>
      <setSpec>physic:hep</setSpec>
    </header> 
    <header>   
    <identifier>oai:arXiv.org:hep-th/9801060</identifier>
      <datestamp>1999-02-23</datestamp>
      <setSpec>physic:hep</setSpec>
    </header>  
    <resumptionToken completeListSize="6" cursor="4"/>
  </ListIdentifiers>
</OAI-PMH>

Request

List the headers of olac-formatted records, added or modified on January 1, 2001 in the set Perseus:collection:PersInfo. There are no matches for this request, hence, the response contains an error tag and does not contain any header elements [URL shown without encoding for better readability].

http://www.perseus.tufts.edu/cgi-bin/pdataprov?
       verb=ListIdentifiers&metadataPrefix=olac&from=2001-01-01&until=2001-01-01
       &set=Perseus:collection:PersInfo

Response

<?xml version="1.0" encoding="UTF-8"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
  <responseDate>2002-02-08T14:27:19Z</responseDate>
  <request verb="ListIdentifiers" metadataPrefix="olac"
    from="2001-01-01" until="2001-01-01"
    set="Perseus:collection:PersInfo">
    http://www.perseus.tufts.edu/cgi-bin/pdataprov</request>
  <error code="noRecordsMatch"/>
</OAI-PMH>

4.4 ListMetadataFormats

Summary and Usage Notes

This verb is used to retrieve the metadata formats available from a repository. An optional argument restricts the request to the formats available for a specific item.

Arguments

Error and Exception Conditions

Examples

Request

List the metadata formats that can be disseminated from the repository http://www.perseus.tufts.edu/cgi-bin/pdataprov for the item with unique identifier oai:perseus.tufts.edu:Perseus:text:1999.02.0119 [URL shown without encoding for better readability].

http://www.perseus.tufts.edu/cgi-bin/pdataprov?
       verb=ListMetadataFormats&identifier=oai:perseus.tufts.edu:Perseus:text:1999.02.0119

Response

The response shows that 3 metadata formats are supported for the given identifier: oai_dc, olac and perseus. For each of the formats, the location of an XML Schema describing the format, as well as the XML Namespace URI is given.

<?xml version="1.0" encoding="UTF-8"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
  <responseDate>2002-02-08T14:27:19Z</responseDate>
  <request verb="ListMetadataFormats"
    identifier="oai:perseus.tufts.edu:Perseus:text:1999.02.0119">
    http://www.perseus.tufts.edu/cgi-bin/pdataprov</request>
  <ListMetadataFormats>
   <metadataFormat>
     <metadataPrefix>oai_dc</metadataPrefix>
     <schema>http://www.openarchives.org/OAI/2.0/oai_dc.xsd
       </schema>
     <metadataNamespace>http://www.openarchives.org/OAI/2.0/oai_dc/
       </metadataNamespace>
   </metadataFormat>
   <metadataFormat>
     <metadataPrefix>olac</metadataPrefix>
     <schema>http://www.language-archives.org/OLAC/olac-0.2.xsd</schema>
     <metadataNamespace>http://www.language-archives.org/OLAC/0.2/
      </metadataNamespace>
   </metadataFormat>
   <metadataFormat>
     <metadataPrefix>perseus</metadataPrefix>
     <schema>http://www.perseus.tufts.edu/persmeta.xsd</schema>
     <metadataNamespace>http://www.perseus.tufts.edu/persmeta.dtd
       </metadataNamespace>
   </metadataFormat>
 </ListMetadataFormats>
</OAI-PMH>

Request

List the metadata formats that can be disseminated from the repository http://memory.loc.gov/cgi-bin/oai.

http://memory.loc.gov/cgi-bin/oai?
       verb=ListMetadataFormats

Response

The response shows that the repository supports two metadata formats: oai_dc, and oai_marc. For each of the formats, the location of an XML Schema describing the format is given. The support of these formats at the repository-level does not imply support of each format for each item of the repository.

<?xml version="1.0" encoding="UTF-8"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
  <responseDate>2002-06-08T15:19:13Z</responseDate>
  <request verb="ListMetadataFormats">
           http://memory.loc.gov/cgi-bin/oai</request>
  <ListMetadataFormats>
   <metadataFormat>
    <metadataPrefix>oai_dc</metadataPrefix>
    <schema>http://www.openarchives.org/OAI/2.0/oai_dc.xsd</schema>
    <metadataNamespace>http://www.openarchives.org/OAI/2.0/oai_dc/
      </metadataNamespace>
   </metadataFormat>
   <metadataFormat>
    <metadataPrefix>oai_marc</metadataPrefix>
    <schema>http://www.openarchives.org/OAI/1.1/oai_marc.xsd</schema>
    <metadataNamespace>http://www.openarchives.org/OAI/1.1/oai_marc
      </metadataNamespace>
   </metadataFormat>
  </ListMetadataFormats>
</OAI-PMH>

Request

List the metadata formats that can be disseminated for the unique identifier oai:lcoa1.loc.gov:loc.rbc/rbpe.00000111 in the repository http://memory.loc.gov/cgi-bin/oai. The identifier, however, does not exist and therefore, the response contains an error element and no metadataFormat container. [URL shown without encoding for better readability].

http://memory.loc.gov/cgi-bin/oai?
       verb=ListMetadataFormats&identifier=oai:lcoa1.loc.gov:loc.rbc/rbpe.00000111

Response

<?xml version="1.0" encoding="UTF-8"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
  <responseDate>2002-06-08T15:19:13Z</responseDate>
  <request verb="ListMetadataFormats"
           identifier="oai:lcoa1.loc.gov:loc.rbc/rbpe.00000111">
           http://memory.loc.gov/cgi-bin/oai</request>
  <error code="idDoesNotExist">oai:lcoa1.loc.gov:loc.rbc/rbpe.00000111 has the 
       structure of a valid LOC identifier, but it maps to no known 
       item</error>
</OAI-PMH>

4.5 ListRecords

Summary and Usage Notes

This verb is used to harvest records from a repository. Optional arguments permit selective harvesting of records based on set membership and/or datestamp. Depending on the repository's support for deletions, a returned header may have a status attribute of "deleted" if a record matching the arguments specified in the request has been deleted. No metadata will be present for records with deleted status.

Arguments

Error and Exception Conditions

Examples

Request

List the records expressed in oai_rfc1807 metadata format, that have been added or modified since January 15, 1998 in the hep subset of the physics set [URL shown without encoding for better readability].

http://an.oa.org/OAI-script?
       verb=ListRecords&from=1998-01-15&set=physics:hep&metadataPrefix=oai_rfc1807

Response

Two records are returned:

Note: The reply only includes records for those items from which metadata in oai_rfc1807 can be disseminated. No records are returned for those items that fit the from, until, and set arguments but from which the specified format can not be disseminated.

<?xml version="1.0" encoding="UTF-8"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
 <responseDate>2002-06-01T19:20:30Z</responseDate> 
 <request verb="ListRecords" from="1998-01-15"
          set="physics:hep"
          metadataPrefix="oai_rfc1807">
          http://an.oa.org/OAI-script</request>
 <ListRecords>
  <record>
    <header>
      <identifier>oai:arXiv.org:hep-th/9901001</identifier>
      <datestamp>1999-12-25</datestamp>
      <setSpec>physics:hep</setSpec>
      <setSpec>math</setSpec>
    </header>
    <metadata>
     <rfc1807 xmlns=
        "http://info.internet.isi.edu:80/in-notes/rfc/files/rfc1807.txt" 
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
      xsi:schemaLocation=
       "http://info.internet.isi.edu:80/in-notes/rfc/files/rfc1807.txt
        http://www.openarchives.org/OAI/1.1/rfc1807.xsd">
        <bib-version>v2</bib-version>
        <id>hep-th/9901001</id>
        <entry>January 1, 1999</entry>
        <title>Investigations of Radioactivity</title>
        <author>Ernest Rutherford</author>
        <date>March 30, 1999</date>
     </rfc1807>
    </metadata>
    <about>
      <oai_dc:dc 
          xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" 
          xmlns:dc="http://purl.org/dc/elements/1.1/" 
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
          xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ 
          http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
        <dc:publisher>Los Alamos arXiv</dc:publisher>
        <dc:rights>Metadata may be used without restrictions as long as 
           the oai identifier remains attached to it.</dc:rights>
      </oai_dc:dc>
    </about>
  </record>
  <record>
    <header status="deleted">
      <identifier>oai:arXiv.org:hep-th/9901007</identifier>
      <datestamp>1999-12-21</datestamp>
    </header>
  </record>
 </ListRecords>
</OAI-PMH>

Request

Request records in the oai_dc metadata format, modified or added between 2:15pm and 2:20pm UTC on May 1st 2002. [URL shown without encoding for better readability].

http://www.perseus.tufts.edu/cgi-b:in/pdataprov?
       verb=ListRecords&from=2002-05-01T14:15:00Z&until=2002-05-01T14:20:00Z&
       metadataPrefix=oai_dc

Response

Two records are returned. The second one has a provenance container in its about element, giving an insight in its chain of provenance.

<?xml version="1.0" encoding="UTF-8"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
 <responseDate>2002-06-01T19:20:30Z</responseDate> 
 <request verb="ListRecords" from="2002-05-01T14:15:00Z"
          until="2002-05-01T14:20:00Z" metadataPrefix="oai_dc">
          http://www.perseus.tufts.edu/cgi-bin/pdataprov</request>
 <ListRecords>
  <record>
    <header>
      <identifier>oai:perseus:Perseus:text:1999.02.0084</identifier>
      <datestamp>2002-05-01T14:16:12Z</datestamp>
    </header>
    <metadata>
      <oai_dc:dc 
          xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" 
          xmlns:dc="http://purl.org/dc/elements/1.1/" 
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
          xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ 
          http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
        <dc:title>Opera Minora</dc:title>
        <dc:creator>Cornelius Tacitus</dc:creator>
        <dc:type>text</dc:type>
        <dc:source>Opera Minora. Cornelius Tacitus. Henry Furneaux. 
         Clarendon Press. Oxford. 1900.</dc:source>
        <dc:language>latin</dc:language>
        <dc:identifier>http://www.perseus.tufts.edu/cgi-bin/ptext?
          doc=Perseus:text:1999.02.0084</dc:identifier>
      </oai_dc:dc>
    </metadata>
  </record>
  <record>
    <header>
      <identifier>oai:perseus:Perseus:text:1999.02.0083</identifier>
      <datestamp>2002-05-01T14:20:55Z</datestamp>
    </header>
    <metadata>
      <oai_dc:dc 
          xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" 
          xmlns:dc="http://purl.org/dc/elements/1.1/" 
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
          xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ 
          http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
        <dc:title>Germany and its Tribes</dc:title>
        <dc:creator>Tacitus</dc:creator>
        <dc:type>text</dc:type>
        <dc:source>Complete Works of Tacitus. Tacitus. Alfred John Church. 
         William Jackson Brodribb. Lisa Cerrato. edited for Perseus. 
         New York: Random House, Inc. Random House, Inc. reprinted 1942.
          </dc:source>
        <dc:language>english</dc:language>
        <dc:identifier>http://www.perseus.tufts.edu/cgi-bin/ptext?
         doc=Perseus:text:1999.02.0083</dc:identifier>
      </oai_dc:dc>
      </metadata>
    <about>
      <provenance
       xmlns="http://www.openarchives.org/OAI/2.0/provenance"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
       xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/provenance  
       http://www.openarchives.org/OAI/2.0/provenance.xsd">
       <originDescription harvestDate="2002-01-01T11:10:01Z" altered="true">
        <baseURL>http://some.oa.org</baseURL>
        <identifier>oai:r2.org:klik001</identifier>
        <datestamp>2001-01-01</datestamp>
        <metadataNamespace>http://www.openarchives.org/OAI/2.0/oai_dc/</metadataNamespace>
        </originDescription>
      </provenance>
    </about>
  </record>
 </ListRecords>
</OAI-PMH>

Request

Request records in the the oai_marc metadata format, modified or added between 2:00am and 3:00am UTC on June 1st 2002. The specified granularity is not supported by the repository and therefore, an error with code attribute of badArgument is returned. [URL shown without encoding for better readability].

http://memory.loc.gov/cgi-bin/oai?
       verb=ListRecords&from=2002-06-01T02:00:00Z&until=2002-06-01T03:00:00Z&metadataPrefix=oai_marc

Response

<?xml version="1.0" encoding="UTF-8"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
  <responseDate>2002-06-01T19:20:30Z</responseDate> 
  <request verb="ListRecords" from="2002-06-01T02:00:00Z"
           until="2002-06-01T03:020:00Z"
           metadataPrefix="oai_marc">
           http://memory.loc.gov/cgi-bin/oai</request>
  <error code="badArgument"/>
</OAI-PMH>

4.6 ListSets

Summary and Usage Notes

This verb is used to retrieve the set structure of a repository, useful for selective harvesting.

Arguments

Error and Exception Conditions

Examples

Request

http://an.oa.org/OAI-script?
       verb=ListSets

Response

The following response indicates a set hierarchy with two top level sets with respective setSpec music and video. The music set has two subsets, with setSpec music:(muzak) and music:(elec). The subsets identified by setSpec music:(elec), has a setDescription element which holds a Dublin Core container, used to describe its contents.

<?xml version="1.0" encoding="UTF-8"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
 <responseDate>2002-08-11T07:21:33Z</responseDate>
 <request verb="ListSets">http://an.oa.org/OAI-script</request>
 <ListSets>
  <set>
    <setSpec>music</setSpec>
    <setName>Music collection</setName>
  </set>
  <set>
    <setSpec>music:(muzak)</setSpec>
    <setName>Muzak collection</setName>
  </set>
  <set>
    <setSpec>music:(elec)</setSpec>
    <setName>Electronic Music Collection</setName>
    <setDescription>
      <oai_dc:dc 
          xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" 
          xmlns:dc="http://purl.org/dc/elements/1.1/" 
          xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
          xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ 
          http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
          <dc:description>This set contains metadata describing 
             electronic music recordings made during the 1950ies
             </dc:description>
       </oai_dc:dc>
    </setDescription>
   </set>
   <set>
    <setSpec>video</setSpec>
    <setName>Video Collection</setName>
   </set>
 </ListSets>
</OAI-PMH>

Request

http://purl.org/alcme/etdcat/servlet/OAIHandler?
       verb=ListSets

Response

The response shows that the repository does not have a set hierarchy.

<?xml version="1.0" encoding="UTF-8"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" 
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/
         http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
  <responseDate>2001-06-01T19:20:30Z</responseDate> 
  <request verb="ListSets">
           http://purl.org/alcme/etdcat/servlet/OAIHandler</request>
  <error code="noSetHierarchy">This repository does not 
         support sets</error>
</OAI-PMH>

5. Dublin Core

The following table shows the XML Schema for Dublin Core without qualification, which is associated with the reserved metadataPrefix oai_dc in the OAI-PMH. All examples in this document that include Dublin Core metadata, validate against this XML schema. Schema for other metadata formats are provided in the accompanying Implementation Guidelines document.

A XML schema for validating Unqualified Dublin Core metadata associated
with the reserved oai_dc metadataPrefix

<schema targetNamespace="http://www.openarchives.org/OAI/2.0/oai_dc/" 
        xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" 
        xmlns:dc="http://purl.org/dc/elements/1.1/" 
        xmlns="http://www.w3.org/2001/XMLSchema" 
        elementFormDefault="qualified" attributeFormDefault="unqualified">
	
<annotation>
  <documentation> 
      XML Schema 2002-03-18 by Pete Johnston.
      Adjusted for usage in the OAI-PMH.
      Schema imports the Dublin Core elements from the DCMI schema for unqualified Dublin Core.
      2002-12-19 updated to use simpledc20021212.xsd (instead of simpledc20020312.xsd)
  </documentation>
</annotation>

<import namespace="http://purl.org/dc/elements/1.1/" 
        schemaLocation="http://dublincore.org/schemas/xmls/simpledc20021212.xsd"/>
	
<element name="dc" type="oai_dc:oai_dcType"/>

<complexType name="oai_dcType">
  <choice minOccurs="0" maxOccurs="unbounded">
    <element ref="dc:title"/>
    <element ref="dc:creator"/>
    <element ref="dc:subject"/>
    <element ref="dc:description"/>
    <element ref="dc:publisher"/>
    <element ref="dc:contributor"/>
    <element ref="dc:date"/>
    <element ref="dc:type"/>
    <element ref="dc:format"/>
    <element ref="dc:identifier"/>
    <element ref="dc:source"/>
    <element ref="dc:language"/>
    <element ref="dc:relation"/>
    <element ref="dc:coverage"/>
    <element ref="dc:rights"/>
  </choice>
</complexType>

</schema>

This Schema is available at http://www.openarchives.org/OAI/2.0/oai_dc.xsd

Examples

<?xml version="1.0" encoding="UTF-8"?>
<oai_dc:dc 
    xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" 
    xmlns:dc="http://purl.org/dc/elements/1.1/" 
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
    xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ 
    http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
  <dc:title xml:lang="en">The Cornell Law Quarterly</dc:title>
  <dc:date>1915-1916</dc:date>
  <dc:identifier>http://heinonline.org/HeinOnline/show.pl?
      handle=hein.journals/clqv1%26id=1%26size=4</dc:identifier>
  <dc:rights>Available by Subscription. 
             See http://www.wshein.com</dc:rights>
</oai_dc:dc>

 

<?xml version="1.0" encoding="UTF-8"?>
<oai_dc:dc 
    xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" 
    xmlns:dc="http://purl.org/dc/elements/1.1/" 
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
    xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/
    http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
  <dc:title xml:lang="en">Grassmann's space analysis</dc:title>
  <dc:creator>Hyde, E. W. (Edward Wyllys)</dc:creator>
  <dc:subject>LCSH:Ausdehnungslehre; LCCN QA205.H99</dc:subject>
  <dc:publisher>J. Wiley &amp; Sons</dc:publisher>
  <dc:date>Created: 1906; Available: 1991</dc:date>
  <dc:type>text</dc:type>
  <dc:identifier>http://resolver.library.cornell.edu/math/1796949
     </dc:identifier>
  <dc:language>english</dc:language>
  <dc:rights xml:lang="en">Public Domain</dc:rights>
</oai_dc:dc>

6. Implementation Guidelines

Some passages in this document refer to the existence and goals of the accompanying Implementation Guidelines document.

Acknowledgements

Support for the development of the OAI-PMH and for other Open Archives Initiative activities comes from the Digital Library Federation, the Coalition for Networked Information, and from the National Science Foundation through Grant No. IIS-9817416.

This document is based on the deliberations of the OAI Technical Committee:

Caroline Arms <caar@loc.gov> Library of Congress
Thomas Baron <thomas.baron@cern.ch> CERN
Steven Bird <sb@ldc.upenn.edu> University of Pennsylvania
Les Carr <lac@ecs.soton.ac.uk> University of Southampton
Tim Cole <t-cole3@uiuc.edu> University of Illinois at Urbana Champaign
Thomas Krichel <krichel@openlib.org> Long Island University
Carl Lagoze <lagoze@cs.cornell.edu> Cornell University
Michael Nelson <m.l.nelson@larc.nasa.gov> NASA
Andy Powell <a.powell@ukoln.ac.uk> UKOLN & University of Bath
Mogens Sandfaer <ms@dtv.dk> Danmarks Tekniske Videncenter
Hussein Suleman <hussein@vt.edu> Virginia Tech
Robert Tansley <Robert_Tansley@hplb.hpl.hp.com> HP
Herbert Van de Sompel <herbertv@lanl.gov> Los Alamos National Laboratory
Simeon Warner <simeon@cs.cornell.edu> Cornell University
Muhammad Zubair <zubair@cs.odu.edu> Old Dominion University
Jeff Young <jyoung@oclc.org> OCLC

Many thanks to all involved in alpha-testing of version 2.0 of the OAI-PMH. In addition to the above:

Tim Brody <tim@tim.brody.btinternet.co.uk> University of Southampton
Irena Dijour <irina.dijour@exlibris.co.il> Ex Libris
Naomi Dushay <naomi@cs.cornell.edu> Cornell University
Susanne Dobratz <susanne.dobratz@rz.hu-berlin.de> Humboldt Universität zu Berlin
Curtis Fornadley <curtisf@library.ucla.edu> UCLA
Christopher Gutteridge <cjg@ecs.soton.ac.uk> University of Southampton
Alan Kent <ajk@mds.rmit.edu.au> InQuirion Pty Ltd & RMIT University
David Letts <david.letts@bl.uk> The British Library
Xiaoming Liu <liu_x@cs.odu.edu> Old Dominion University
Jon Phipps <jphipps@cs.cornell.edu> Cornell University
Francois Schiettecatte <francois@fsconsult.com> FS Consulting Inc

Special thanks to Pete Johnston <p.johnston@ukoln.ac.uk> and Andy Powell <a.powell@ukoln.ac.uk> for work on Dublin Core schema. And to Donna Bergmark <bergmark@cs.cornell.edu> for work on the OAI validation and registration service.

Many thanks to everyone involved in the compilation and alpha-testing of version 1.0 and 1.1 of the OAI-PMH. And to all of you using this protocol.

Document History

2004-09-15: Added section 2.5.1. Corrected section 2.6. Corrected second example in section 5. Changed schema to defined a type for protocolVersion and to enforce use of Z notation for UTC datetime.
2003-02-21: Changed identifiers in the examples so that they conform to version 2.0 of the oai-identifier specification.
2002-12-19: Updated oai_dc schema to use revised Dublin Core schema simpledc20021212.xsd. Corrected provenance blocks in examples (sections 2.5 and 4.5).
2002-06-14: Release of OAI-PMH version 2.0.
2002-05-02: Release of beta version of OAI-PMH version 2.0.
2002-05-06: Release of alpha-4 version of OAI-PMH version 2.0. Changed document to reflect association of datestamps and deleted status with records as opposed to items. Changed requestURL to request. Changed schema location of oai-identifier and oai_dc schema. Changed validation of about, metadata, description and setDescription to strict.
2002-04-07: Changed document to reflect the usage of a single schema to validate all OAI-PMH responses.
2002-03-30: Release of alpha two version of OAI-PMH version 2.0.
2002-03-01: Release of alpha version of OAI-PMH version 2.0